Ad Check Weighing Scales FS-6Ki User Manual

Check Weighing Scales FS-6Ki FS-15Ki FS-30Ki1WMPD4001332

8Description of Key Operations ON/OFF Key The ON/OFF key turn the power on or off. When turnedon, the scale will be automatically set to zero (powe

9 PRINT / ENT Key The PRINT key is used when the serial data option OP-03or OP-04 is installed and sends one data string. In the dataentry sequ

107. BASIC OPERATION 7-1. Turning the power ON and OFF 1. Press the ON/OFF key to turn the power ON. All the display symbols are displayed and t

11Note for the Legal for Trade Models The range for power-on zero is within ±10% of the weighing capacity around the calibrated zero point.  The ZE

127-6. Weight display resolution The FS-i series has three kinds of weight display resolution, NORMAL, HIGH and HIGHER. The following is about “kg” an

138. CHECK WEIGHING The FS-i series provides for easy check weighing of products. There are two comparison modes according to number of parameters to

14Setting the target weight by sample 1. Press the ZERO key to zero the weight display if necessary. 2. Place the sample on the weighing pan. The di

153. Press the ENT key to store the HI limit weight in memory. 4. The display shows 5tored for a few seconds and returns to weighing mode. 5.

165. Press the LO key. Then, the last LO % weight entered will flash and the left part of analog display turns on. 6. Enter the LO limit weight via

173. Press the ENT key to store the HI limit weight in memory. 4. The display shows 5tored for a few seconds and returns to weighing mode. 5.

This Manual and Marks All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard I

18Recalling a set of limits from memory1. Press the RECALL key. Then the display will show rd 00 .2. Press the memory number, for example 3.  If y

199. ANALOG SWEEP DISPLAY The FS-i series has a 60 segments analog sweep display. The DISP. key switches its display mode.  It is possible to s

209-2. Example of the analog sweep display Simple weighing display mode FS-30Ki / d=0.01 kg TARGET WEIGHT SETTING MODE (F07-1 or F07-2) Target weight

21FS-30Ki / d=0.01 kg UPPER & LOWER LIMIT WEIGHT SETTING MODE (F07-0)Target weight = 5.00 kg. HI = 10.10 kg, LO = 9.91 kg  Outside the range of t

2210. CALIBRATION This function adjusts the scale for accurate weighing. Calibrate the scale in the following cases.  When the scale is first used. 

237. To calibrate with the different weight, change the displayed value using the 10-key pad.  If you hit the wrong number, press the C key. The

2411. FUNCTIONS The scale has Function settings to expand your applications. The parameters set in the Function settings are maintained even if the po

2511-2. Function list ItemFunction number Description f 1- 0 Auto power-off disabled Auto power-off functionf 1- 1 Auto power-off enabled Automat

26ItemFunction number Description f11- 0 f11- 1 Stability detection width f11- 2 NarrowWidef12- 0 f12- 1 Stability detection time f12- 2 ShortLongC

2712. SPECIFICATIONS 12-1. Specifications MODELFS-6Ki FS-15Ki FS-30KiCapacity 6 15 30 0.002 * 0.005 * 0.01 *0.001 0.002 0.005 kgMin. display 0.0005 0

1Contents 1. COMPLIANCE ... 2 2. INTRODUCTION...

2812-2. Dimensions FS-6KiFS-15KiFS-30KiUnit: mm250250250984841449625038046449610730048

2913. GRAVITY ACCELERATION MAP Values of gravity at various locations Amsterdam 9.813 m/s2 Manila 9.784 m/s2 Athens 9.807 m/s2 Melbourne 9.800

30World map

31MEMO

32MEMO

21. COMPLIANCE Compliance with FCC rules  Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has

32. INTRODUCTION This manual describes how this scale works and how to get the most out of it in terms of performance. FS-i series check weighing scal

44. CAUTION 4-1. Precautions for Installing the Scale  Ground the scale so that the user will not be subjected an electric shock.  Do not handle the

55. SETTING UP 5-1. Attaching a display pod to the display support column 1. Take out whole of the scale from the box taking care not to pull the load

66. NAMES AND FUNCTIONS `DisplaycolumnColumnsupport footSpirit levelWeighing panLeveling footEarthterminalCAL switch coverCable hookDisplay pod1569873

7WEIGHT DATA DISPLAY. This display shows the weight on the weighing pan. WEIGHING UNIT INDICATOR. This display area shows the weighing unit in use.